Unicom's Micro-Switch 16 is a store-and-forward devise that offers low latency for high speed networking. It is targeted at workgroup, department, or backbone computing environments in SME (small, medium enterprise) businesses. The Micro-Switch has dedicated 10/100Mbps bandwidth. The full-duplex operation mode effectively doubles the bandwidth for each port.  This can increase the bandwidth of the 10M Ethernet port and the 100Mbps Fast Ethernet port to 20Mbps and 200Mbps, respectively. To enhance the performance, the switch supports IEEE 802.3 full-duplex flow control and half-duplex back pressure congestion control. In addition, it executes the method of store-and-forward by auto-learning and stores source addresses on a 2K-entry MAC address table.

Unicom's Micro-Switch 24 is a store-and-forward devise that offers low latency for high speed networking. It is targeted at workgroup, department, or backbone computing environments in SME (small, medium enterprise) businesses. The Micro-Switch has dedicated 10/100Mbps bandwidth. The full-duplex operation mode effectively doubles the bandwidth for each port.  This can increase the bandwidth of the 10M Ethernet port and the 100Mbps Fast Ethernet port to 20Mbps and 200Mbps, respectively. To enhance the performance, the switch supports IEEE 802.3 full-duplex flow control and half-duplex back pressure congestion control. In addition, it executes the method of store-and-forward by auto-learning and stores source addresses on a 2K-entry MAC address table.

Unicom's Micro-Switch 5 is a store-and-forward devise that offers low latency for high speed networking. It is targeted at workgroup, department, or backbone computing environments in SME (small, medium enterprise) businesses. The Micro-Switch has dedicated 10/100Mbps bandwidth. The full-duplex operation mode effectively doubles the bandwidth for each port.  This can increase the bandwidth of the 10M Ethernet port and the 100Mbps Fast Ethernet port to 20Mbps and 200Mbps, respectively. To enhance the performance, the switch supports IEEE 802.3 full-duplex flow control and half-duplex back pressure congestion control. In addition, it executes the method of store-and-forward by auto-learning and stores source addresses on a 2K-entry MAC address table.

Unicom's Micro-Switch 8 is a store-and-forward devise that offers low latency for high speed networking. It is targeted at workgroup, department, or backbone computing environments in SME (small, medium enterprise) businesses. The Micro-Switch has dedicated 10/100Mbps bandwidth. The full-duplex operation mode effectively doubles the bandwidth for each port.  This can increase the bandwidth of the 10M Ethernet port and the 100Mbps Fast Ethernet port to 20Mbps and 200Mbps, respectively. To enhance the performance, the switch supports IEEE 802.3 full-duplex flow control and half-duplex back pressure congestion control. In addition, it executes the method of store-and-forward by auto-learning and stores source addresses on a 2K-entry MAC address table.

The DynaGST/2402G Gigabit Ethernet switch is an ideal solution for solving traffic congestion at the core of the network. It offers auto-negotiation 10/100/1000Base-T Gigabit Ethernet ports that can significantly improve your network backbone performance. It will also fit into any enterprise level network as an exit to the backbone switch. This DynaGST switch provides two mini GBIC Gigabit slots for Gigabit speed network connections. The DynaGST/2402G Gigabit Ethernet switch features an Auto MDI/MDIX function for each port and supports  store-and-forward switching. It auto-learns and stores source addresses on a 4K MAC address table.

• Auto full- or Half-duplex operation mode for UTP Port
• Uses store-and-forward switching to separate collision domains
• Prevents packet loss by supporting back-pressure & flow control
• Three DIP-switches for operation mode setup and Link-Loss Forwarding function (GEP-5300TF-C only)
• Per port LEDs for diagnosis and maintenance
• FCC Class A, CE Mark certification

• Auto full- or Half-duplex operation mode for UTP Port
• Uses store-and-forward switching to separate collision domains
• Prevents packet loss by supporting back-pressure & flow control
• Per port LEDs for diagnosis and maintenance
• FCC Class A, CE Mark certification