EZ-RJ45 CAT 5/5e Connectors

The patented EZ-RJ45 Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA.

• Thru holes allow wire pairs to be inserted thru front of connector for faster terminations.
• Works with solid or stranded wire.
• Simple one piece design...no bars or liners.
• FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks.
• EZ to verify wire sequence.

The new patented EZ-RJ45 Cat 6+ Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. By reducing the distance between the wire twists and contacts, performance is optimized! Crimp with the patented EZ-RJ45 Crimp Tool... crimps and trims in one cycle. (See Part Number 100 004 or 100 054 EZ-RJPRO HD). Manufactured in the USA. Patented.

• For use in Cat 6 compliant data networks.
• Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated.
• EZ to verify wire sequence. Simple one piece design...no bars or liners.
• Works with solid or stranded wire.
• Faster terminations with reduced scrap.

The new EZ-RJPRO™ HD Crimp Tool is designed for the professional installer providing a ratcheted, high leverage, ultra stable platform for consistent, repeatable terminations. This heavy duty tool is the perfect solution when working with high performance, larger OD cables that are tougher to terminate due to larger wire gauges, thicker, harder insulation on the conductors and pair separating splines. Not only will you overcome these connectivity obstacles but you can be assured that every termination will meet FCC specifications. Compatible with all EZ-RJ45® and EZ-RJ12/11 connectors as well as all standard modular plugs, except AMP.

• Zero flex frame prevents torque loss during the crimping cycle.
• Tool steel die head assembly provides 360° of connector support during crimp.
• Clean, ultra flush trim on the EZ-RJ45® extended conductors.
• Expanded surface area on contact drivers delivers full, uniform crimp force.
• Built in wire cutter and strippers